This guide details how to remove and clean the vents located between the windscreen and bonnet of your vehicle. Debris accumulation in this area can potentially lead to corrosion and should be addressed.
Problem
Accumulation of debris (leaves, muck, etc.) within the vents between the windscreen and bonnet.
Solution
-
Remove the wiper arms.
-
Remove the cowl located next to the bonnet shock absorbers.
-
Carefully detach the vent panel. This panel is secured by approximately 2 clips and 15-16 claw clips.
Crucially, exercise extreme caution when removing the vent panel as the clips/claws are fragile and prone to breaking.
-
Clean the vents thoroughly.
-
Reinstall the vent panel, cowl, and wiper arms.
This technical summary was auto-generated based on recovered archives. Do not rely on its factual accuracy. Refer to the original thread. Source: View Original Conversation
Continue the discussion below.