Introduction
This document provides guidance on selecting the appropriate EGT probe type (straight or 90-degree) for pre-turbocharger and post-turbocharger installation.
Problem
Determining whether a straight or 90-degree EGT probe is more suitable for pre-turbo installation.
Solution
- Either a straight or 90-degree EGT probe will fit in the pre-turbo location.
- A 90-degree EGT probe is required for post-turbo installation.
This technical summary was auto-generated based on recovered archives. Do not rely on its factual accuracy. Refer to the original thread. Source: View Original Conversation
Continue the discussion below.