Cracked inner guards, predominantly on the passenger side, in 150 series Prados. The cracks are often found near the fuse box in the engine bay.
Solution
A Toyota patch kit can be installed. Welding the crack before installing the patch is recommended.
Parts
Toyota Patch Kit Part Numbers:
- 5373160100 - Patch Fr fender (Qty 1)
- 5373260060 - Fr fender apron (Qty 1)
- 9017606042 - Nut cap (Qty 34)
- 9018906065 - Grommet (Qty 10)
- 91671A0612 - Bolt flange (Qty 32)
These parts appear to cover both sides of the vehicle.
Notes
- Toyota dealerships may initially deny the existence of a patch kit or claim it is for “mechanic use only”.
- Some dealerships may blame aftermarket modifications (bull bars, suspension) and refuse warranty claims.
- The inner guard design was updated in later models to address this issue.
- Welding by a panel beater alone is not sufficient. Installation of the patch kit is recommended.
- Patch kit is also available for the 120 series Prado
This technical summary was auto-generated based on recovered archives. Do not rely on its factual accuracy. Refer to the original thread. Source: View Original Conversation
Continue the discussion below.