Introduction
This article addresses a common issue experienced by owners of the 150 series: a clunking or thumping noise emanating from the rear door, particularly when driving over bumps with an unloaded cargo area.
Problem
A noticeable clunking or thumping sound comes from the rear door area, especially when the vehicle is empty and driven over speed bumps. The sound suggests the door is not properly secured.
Solution
Adjust the rear door striker plate. This adjustment ensures a tighter and more secure closure of the rear door, eliminating the rattling and clunking noises.
Procedure
- Loosen the bolts securing the striker plate on the vehicle body where the rear door latch engages.
- Adjust the position of the striker plate slightly. Experiment with small adjustments to find the optimal position.
- Tighten the striker plate bolts.
- Test the door closure. It should close firmly and without excessive force, and the clunking noise should be eliminated when driving over bumps.
- Repeat steps 2-4 as needed until the issue is resolved.
Notes
- Adjustment of the striker plate may also result in a more positive feel when closing the rear door.
This technical summary was auto-generated based on recovered archives. Do not rely on its factual accuracy. Refer to the original thread. Source: View Original Conversation
Continue the discussion below.