Rear Light Assembly Removal (Toyota Land Cruiser Prado 120 Series)

Toyota Prado 120 Series
1

Introduction

This guide details the removal of the rear light assembly on a Toyota Land Cruiser Prado 120 Series (2003-2004 models), specifically when replacing a blown stop light bulb.

Problem

The rear light assembly is difficult to remove after the retaining bolts have been removed.

Solution

  1. Remove the two retaining bolts securing the light assembly.
  2. Firmly slap the side of the light assembly rearwards with the palm of your hand. This should dislodge the assembly, allowing it to be removed.

This technical summary was auto-generated based on recovered archives. Do not rely on its factual accuracy. Refer to the original thread. Source: View Original Conversation

Continue the discussion below.