This article provides a guide to replacing wiper blades on a Toyota Prado 150 Series, focusing on the use of Bosch Aerotwin blades.
Problem
The factory-installed wiper blades on the Prado 150 series may wear out and need replacement.
Solution
Replacing the wiper blades with Bosch Aerotwin blades.
- Identify Correct Part Numbers: Ensure you have the correct Bosch Aerotwin part numbers. It’s important to specifically select the diesel model in online catalogues to find the correct fitment for the 150 series.
- Preparation: Open the hook on the wiper blade where it clips onto the wiper arm.
- Removal: Pull the old blade downwards to unhook it from the arm.
- Prepare New Blade: Open the clip cover on the new Bosch blade by pinching the sides at the ridges and lifting the clip.
- Installation: Slide the new blade over the hook, ensuring the hook passes through the opened clip. Slide the curved part of the clip into the hook before locking the clip down.
- Secure: Close the clip to secure the new blade.
- Test: Test the new blades with the windshield washers.
Relevant Parts
- Bosch Aerotwin Wiper Blades: AR701S
- Driver Side: BBA650 (650mm)
- Passenger Side: BBA500 (500mm)
This technical summary was auto-generated based on recovered archives. Do not rely on its factual accuracy. Refer to the original thread. Source: View Original Conversation
Continue the discussion below.