Introduction
This guide provides information on wiring a towbar for a Toyota Land Cruiser Prado 90 Series, focusing on identifying factory wiring and potential connection points.
Problem
Need to connect trailer wiring to a newly installed towbar on a 90 Series Prado.
Solution
- Series 2 90 Series: Locate the factory trailer wiring socket in the rear of the vehicle. A compatible trailer harness can then be plugged directly into this socket.
- Alternative Connection: If a direct plug-in harness isn’t available, the factory socket wires can be spliced into.
Relevant Parts
- Trailer wiring harness (compatible with 90 Series Prado or suitable for splicing).
This technical summary was auto-generated based on recovered archives. Do not rely on its factual accuracy. Refer to the original thread. Source: View Original Conversation
Continue the discussion below.